99-04 SuperDuty Knuckle Crossover Weld On High Steer Arms (Pair). Configurable and affordable weld on arms for the 99-04 SuperDuty Knuckles to help eliminate those swap steering issues. Provides 3 different variations to obtain the optimal steering set up for your rig.Fully fabricated for the best steering geometry and clearancesAllows for straight tie rod - no bends - and clears even deep fabricated differential coversIncluded Knuckle Bolts and tapered spacers for tight fit and increased strengthWelds directly to factory knuckles (1999 to 2004 SuperDuty)3/4 inch bolt holes for uncompromising steering strengthPrecision Laser Cut from 1/4 inch steel and CNC Bent for accurate fitmentMinimal modification to OEM knuckle neededSold in pairs only. Includes knuckle bolt kits (8 inch long bolt, sleeve and stover locking nut) and all internal gusseting.Rod end bolts not included because different lengths are needed depending on which holes you use.Knuckle holes will need to be drilled out to 3/4 inch. Casting remnants on front of knuckle will need to be ground down. Knuckles from different years are slightly different from each other so we've etched a trim line on the laser cut part that will need to be trimmed off.
Requires welding and minor fabrication. We highly recommend this kit only be installed by a competent welder.
Steering Arm
Documents
Package Information
Package Length:11 INPackage Width:5 INPackage Height:5 INWeight:18 LBOrderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0
Extended Information
Country of Origin (Primary):USA